The DISH Pro Plus Twin LNBF features DISH Pro Plus Technology and provides reception from the 110 and 119 orbital locations. The device includes two receiver outputs and one input from an additional DISH Pro Single, DISH Pro Dual, or a DISH Network bandstacked FSS LNBF supporting a third orbital location.
This LNBF supports connection of up to two satellite receivers in any of the following combinations:
Single-cable connection to DISH Pro Plus (dual-tuner) receivers, when each input is used with a DISH Pro Plus Separator.
Single-cable connection to DISH Pro receivers.
Single-cable connection to one Legacy (no DISH Pro or DISH Pro Plus label) receiver, without a DISH Pro Adapter. However, an additional satellite receiver must also be installed as follows:
- For 110W/119W reception only, a second operating satellite receiver must be connected to provide power to the LNBF.
- For 110W/119W reception plus satellite reception from an additional compatible LNBF, a DISH Pro or DISH Pro Plus receiver must also be installed to provide power to the LNBF.
The picture below shows the three ports provided on the DISH Pro Plus Twin LNBF. The ports marked 1 and 2 are used to connect two satellite receivers. The port marked LNB IN is used to connect to a DISH Pro Single, DISH Pro Dual, or a DISH Network bandstacked FSS LNBF.
